Abicor Binzel BRS-CC Mode D'emploi page 48

12 Disposal
12 Disposal
For the BRS-CC torch cleaning station to be properly disposed of, it first must be disassembled. When
disposing of the system, local regulations, laws, provisions, standards and guidelines must be observed.
 11 Disassembly on page EN-23.
12.1 Materials
This product is mainly made of metallic materials, which can be melted in steel and iron works and are thus
almost infinitely recyclable.
The plastic materials used are labelled in preparation for their sorting and separation for later recycling.
12.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Please observe the relevant
local regulations and disposal instructions in the safety data sheets specified by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be disposed of in accordance with
the information provided by the consumables' manufacturer.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.Notes
EN - 24
BRS-CC