Flow Chart - Abicor Binzel BRS-CC Mode D'emploi

6 Putting into operation

6.1 Flow chart

Fig. 7
Y1
Y2
Y3
Y4
Air-blast option
Ready
Tab. 15
EN - 14
Position P1
Cleaning &
Injection Approach
Determine cause
and eliminate it
No
Option
Air blast = 1
Waiting time
approx. 0.5 sec.
approx. 2 sec.
Option
Air blast = 0
Determine cause
and eliminate it
No
Flow chart
5/2 directional valve stroke UP - DOWN
5/2 directional valve for clamping cylinder (CLAMP - RELEASE) and compressed-air
motor (ON - OFF)
5/2 directional valve for wire cutter (ON - OFF)
5/2 directional valve for injector (ON - OFF)
Air-blast through cable assembly (ON - OFF)
Home position of the cleaning station (stroke cylinder down, S1 activated)
Explanations
Position P3
Approach
Input
Ready = 1
Yes
Position P2
Approach
Output
Y2 = I
Output
Y1 = I
Waiting time
Output
Y1 = 0
Output
Y2 = 0
Input
Ready = 1
Yes
Position P1
Approach
BRS-CC
Position P4
Approach
Output
Y4 = 1
Waiting time
approx. 1 sec.
Output
Y4 = 0
Position P3
Approach
Position P5
Approach
Output
Y3 = I
Waiting time
approx. 0.5 sec.
Output
Y3 = 0
Move out of
torch cleaning station