Delivery Contents; Intended Use; Safety Notices - Scheppach HM100T Traduction Des Instructions D'origine

3. Delivery contents

1 x table/chop/mitre saw
1 x carbide tipped saw blade
1 x Allen key 6 mm
1 x Allen key 3 mm
1 x rip fence
1 x cross stop
1 x push stick
• Open the packaging and carefully remove the ma-
chine.
• Remove packaging and transportation safety de-
vices (if applicable).
• Check that the delivery contents are complete.
• Check machine and accessories for damage
caused during transport. In the event of complaints,
you must contact the distributor without delay.
Claims at a later stage will not be accepted.
• If possible, store packaging until the warranty ex-
pires.
• Before handling the device, make yourself familiar
with it by reading these operating instructions.
• For accessories, consumables and spare parts,
only ever use original parts. Spare parts are avail-
able from your stockist.
• Include our item number, the device type and year
of manufacture in your order.
m WARNING!
The device and the packaging materials are not
toys! Children must not play with plastic bags,
plastic sheeting and small parts!
m DANGER
Risk of choking and suffocation!

4. Intended use

The machine is suitable for applications using an AC
source of 230 V.
You must make sure you observe the restrictions
specified in the safety notices.
The table, chop and mitre saw with upper table is de-
signed for chopping as well as lengthwise and cross-
wise cutting (only with cross stop) of wood and plas-
tic, in accordance with the size of the machine.
The saw is not suitable for cutting fire wood.
Only ever use saw blades suited to the machine. The
use of cutting discs of any kind is prohibited.
Only ever use the machine for its intended purpose.
Every use beyond that is deemed as not intended.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
The user/operator, and not the manufacturer, is liable
for damage or injury of any kind caused by use other
than that intended.
Please note that our machines have not been con-
structed for commercial, technical or industrial use.
We do not assume any guarantee if the machine is
used in commercial, technical or industrial settings or
for tasks of this kind.

5. Safety notices

In this user manual, we have marked sections con-
cerning your safety with this sign: m
Additionally, the operating manual contains other
important text passages which are marked with the
word „WARNING!".
m WARNING!
When using machines, safety measures must be
complied with in order to prevent injury and damage.
Therefore, carefully read this operating manual/these
safety notices. If you hand over the machine to oth-
ers, please also pass on this manual/these safety
notices. We are not liable for accidents or damage
caused by non-compliance with this manual and
these safety notices.
m DANGER
If this instruction is not complied with, there is a con-
siderable danger to life or the risk of life-threatening
injuries.
m WARNING
If this instruction is not complied with, there is a dan-
ger to life or the risk of severe injuries.
m CAUTION
If this instruction is not complied with, there is a slight
to medium risk of injury.
m NOTICE
If this instruction is not complied with, there is a dan-
ger of damaging the motor or other objects.
GB | 29