LEGRAND KEOR HPE 60 Manuel De Fonctionnement page 83

15) On Level no. 6, insert tray no. 17 in compliance with the position and cabling as demonstrated
in Picture 41.
Picture 41 - View from above Level No.6 tray no. 17
NOTES: On tray no.16 check the circled jumper is not connected,
16) Insert tray no. 16 by removing the circled jumper and inserting the jumpers as demonstrated in
Picture 42.
Interconnection link between
tray 15 to tray 16
Picture 42 - View from above Level No.6 trays no. 16-17
58 OMW07096 REV. E
Installation and start-up of KEOR HPE UPS 60÷80 kVA
Installation et démarrage de l'ASI KEOR HPE 60÷80 kVA
Installazione e avviamento KEOR HPE UPS 60÷80 kVA
leave the circled jumper disconnected.