LEGRAND KEOR HPE 60 Manuel De Fonctionnement page 80

Installation and start-up of KEOR HPE UPS 60÷80 kVA
Installation et démarrage de l'ASI KEOR HPE 60÷80 kVA
Installazione e avviamento KEOR HPE UPS 60÷80 kVA
NOTES: On trays no. 7 and no. 9 check the circled jumper are not connected,
leave the circled jumper disconnected.
Picture 35 - View from above Level No.3
9) Wire the level as indicated in Picture 36. Leave the circled jumpers disconnected.
Picture 36 - View from above Level No.3 with battery connections
11) On Level no. 4, insert trays no. 10-11-12 in compliance with the position as demonstrated in Picture 37.
NOTES: On trays no. 10 and no. 12 check the circled jumper are not connected,
OMW07096 REV. E 55