Rotate And Flip The Blades; Replace The Blades; Keep It Clean; Cleaning The Body - Worx LANDROID M WR140 Mode D'emploi

provided with your Landroid
your nearest WORX retailer.
A. Rotate and flip the blades
®
Your Landroid M carries 3 Blades that are all screwed onto the
Blade Turning Disc (13). The Blades allow the Landroid
job and need care and attention. Every once in awhile, you should
simultaneously rotate and flip all blades for a perfect cut. When
rotating and flipping the Blades, make sure all the Blades are
adjusted at the same time or else it could make the Blade Disc off
®
balance. If your Landroid M mows on a normal schedule (daily)
then the Blades should last one season if they are rotated and
flipped every month. Always check to see if the Blades are chipped
or damaged and replace them if they are.
B. Replace the blades (See Fig. L)
After some time, usually every season, your Landroid
will need to be replaced. Your Landroid
while using Blades of different age and quality. So when replacing
the Blades, make sure to replace all of them at the same time.
You can replace them with one of the three spare Blade kits and
extra Blade screws supplied with your Landroid
Before attempting to replace your Landroid
power off and put on protective gloves. Then follow these steps:
1. Gently flip the Landroid
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver.
4. Firmly screw on the new Blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the Blade to the Blade
Disc, make sure the Blade is able to spin freely.

6.2 Keep It Clean

WARNING: Before cleaning turn your Landroid
OFF by pressing the ON/OFF Button. Put on
protective gloves before cleaning the Blade Turning
Disc (13) and do not use running water. (See Fig. M, N)
A. Cleaning the body
®
Your Landroid M will live a much happier and longer life if it is
cleaned regularly. Although, as your Landroid
machine, you will need to take care when cleaning, so DO NOT
use a hose, high pressure washers or otherwise pour running
®
water on your Landroid M, it is best to use a spray bottle filled
with water. When cleaning the machine body use a soft brush
or clean cloth and avoid using solvents or polishes (See Fig. M).
Lastly, make sure that you remove all build up of grass clippings
and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
ON/Off Button and wear protective gloves before touching
the Blade Turning Disc (13).
®
First, flip your Landroid M upside down to expose its underside.
Here you will see the Blade Disc (a), the chassis (b), and the Front
Wheel (15) and Driving Wheel(10). Clean everything thoroughly
with a soft brush or moist rag (See Fig. N).
Rotate the Blade Disc to make sure it moves freely and that there
Lawn Mowing Robot
®
M. Spare blades are also available at
®
®
M's Blades
®
M does not like mowing
®
M.
®
M's Blades, turn the
®
M over.
®
M is an electric
®
M OFF using the
M do its
L
M
®
M
(a)
N
(b)
EN
15