Maintenance; Keep It Sharp; Replace The Blades; Keep It Clean - Worx LANDROID Mode D'emploi

9.

Maintenance

Switch off the machine before carrying out any servicing or maintenance. Your Landroid
time. The Landroid
become worn. Never use your Landroid
In the following we want to let you know how to take care of your Landroid

9.1 Keep it sharp

WARNING: Before cleaning, adjusting, or
replacing the Blades, turn your Landroid
put on protective gloves.
WARNING: When fitting new blades, make sure
you replace ALL the blades. Always use new
screws when fitting blades. This is important to ensure
blade retention. Failure to use new screws could cause
serious injury.
®
The Landroid does not cut grass like other mowers. Its Cutting
Blades (12) are razor sharp on 2 edges and rotate in both directions
for maximum cutting capacity (See Fig. K). Each blade of your
®
Landroid has 2 cutting edges. The Blade Turning Disc will make
forward and reverse rotation at random to use both cutting edges.
Thus helps to minimize the frequency of replacing the cutting blade. Each cutting blade will last up to 2 months when it
is programmed to mow everyday. Always check to see if the Blades are chipped or damaged and replace them if they
are. When the cutting blades are dull and worn out, they should be replaced with the spare blades provided with your
®
Landroid . Spare blades are also available at your nearest WORX retailer.
A. Replace the Blades
After some time, usually every season, your Landroid
mowing while using Blades of different age and quality. So when replacing the Blades, make sure to replace all of them
14
at the same time. You can replace them with one of the spare Blade kits and extra Blade screws supplied with your
®
Landroid .
Before attempting to replace your Landroid's Blades, turn the power off and put on protective gloves. Then follow these
steps:
1. Gently flip the Landroid
2. Remove the battery cover and remove the battery.
3. Take the screws off the Blades with a screwdriver (See Fig. L)
4. Firmly screw on the new Blades.
5. Refit the battery and the battery cover.
IMPORTANT: After screwing the Blade to the Blade
Disc, make sure the Blade is able to spin freely.

9.2 Keep it clean

WARNING: Before cleaning turn your Landroid
OFF. Put on protective gloves before cleaning the
Blade Turning Disc (13) and do not use running water.
A. Cleaning the body
®
Your Landroid will live a much happier and longer life if it is cleaned
regularly. Although, as your Landroid
a hose, high pressure washers or otherwise pour running water on your Landroid
spray bottle filled with water. When cleaning the machine body use a soft brush or clean cloth and avoid using solvents or
polishes (See Fig. M). Lastly, make sure that you remove all build up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
(13).
First, flip your Landroid
Wheel (11) and Driving Wheel (10). Clean everything thoroughly with a soft brush or moist rag.
Lawn Mowing Robot
®
works hard and after time needs a good cleaning as well as having some parts replaced, as they can
®
with defective Main switch.
®
over.
® is an electric machine, you will need to take care when cleaning, so DO NOT use
®
upside down to expose its underside. Here you will see the Blade Disc, the chassis, and the Front
®
.
®
OFF and
K
®
's Blades will need to be replaced. Your Landroid
®
L
®
OFF and wear protective gloves before touching the Blade Turning Disc
®
needs to be checked from time to
1
2
®
does not like
® , it is best to use a
EN