Clean The Contact Pins And The Charging Strips; Battery Life - Worx LANDROID Mode D'emploi

WARNING: NEVER clean the underside of Landroid
water flushing. Component damage can occur. (See Fig. N1,
N2)
Rotate the Blade Disc to ensure it rotates freely. Check the blades
spin freely around the fixing screws. Remove any obstructions.
IMPORTANT: Remove any lodged debris so that it does
not cause a crack in the Blade Disc. Even the tiniest
crack can decrease your Landroid
N1
C. Clean the contact pins and the charging strips
Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strips (4) located on the Landroid
cloth. Remove any build up of grass clippings and debris around the Contact Pins and charge strips periodically to ensure
®
the Landroid successfully charges each time.

9.3 Battery life

®
The heart of the Landroid is its 20-volt lithium-ion battery. No maintenance is required. For proper storage of the battery,
make sure it is fully charged in kept in a cool dry place between (20°C - 60°C).
The life-span of the Landroid
• The time span of the mowing season in your region
• Amount of hours the Landroid
• Battery maintenance during storage
®
Landroid can be charged manually without the boundary wire.
To manually charge the battery without connecting the boundary wire to the Charging Base;
1. Connect the Charging Base to a suitable power supply. The Charging Base green light will turn on.
2. Manually dock the Landroid
3. The Charging Base green light will turn to red, and the battery indication light will flash green. (See
®
Fig. O2) Landroid will begin to charge.
Lawn Mowing Robot
®
's mowing output.
®
's battery depends on various factors, such as:
®
mows per day
®
into the Charging Base while the Landroid
®
with
M
N2
®
®
using a
is powered off. (See Fig. O1)
EN
15