Keep It Clean; Cleaning The Body; Cleaning The Underside; Clean The Contact Pins And The Charging Strips - Worx LANDROID WG794E Manuel D'instructions

Before attempting to replace your Landroid
these steps:
1. Gently flip the Landroid
2. Take the screws off the Blades with a screwdriver
3. Firmly screw on the new Blades (See Fig. K)
IMPORTANT: After screwing the Blade to the Blade Disc, make sure the Blade is able to spin freely.

5.2 Keep it clean

WARNING: Before cleaning turn your Landroid
protective gloves before cleaning the Blade Turning Disc (13) and do not use running water.
(See Fig. L,M)
A. Cleaning the body
®
Your Landroid M will live a much happier and longer life if it is cleaned regularly. Although, as your Landroid
electric machine, you will need to take care when cleaning, so DO NOT use a hose, high pressure washers or otherwise
pour running water on your Landroid
body use a soft brush or clean cloth and avoid using solvents or polishes (See Fig. L) .Lastly, make sure that you remove
all build up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
before touching the Blade Turning Disc (13).
®
First, flip your Landroid M upside down to expose its underside. Here you will see the Blade Disc (a), the chassis (b), and
the Front Wheel (15) and Driving Wheel(10). Clean everything thoroughly with a soft brush or moist rag(See Fig. M).
Rotate the Blade Disc to make sure it moves freely and that there is not anything lodged between it and the surrounding
Motor Frame Box. Also, make sure the Blades are able to spin freely and that there's no grass obstructing them.
IMPORTANT: Remove any lodged debris so that it does not cause
a crack in the Blade Disc. Even the tiniest crack can decrease your
®
Landroid M's mowing output.
C. Clean the contact pins and the charging strips
Clean the Contact Pins (3) located on the Charging Base (4) and the
Charging Strip (5) located on the Landroid
any build up of grass clippings and debris around the contact pins
and charge strips periodically to ensure the Landroid
charges each time.
L
Lawn Mowing Robot
®
M's Blades, turn the power off and put on protective gloves. Then follow
®
M over
®
M, it is best to use a spray bottle filled with water . When cleaning the machine
® M OFF using the ON/Off Button and wear protective gloves
®
M using a cloth. Remove
®
M successfully
®
M OFF by pressing the ON/OFF Button. Put on
(a)
(b)
M
®
M is an
15
EN