Transport - Ecolab Elados EMP III - E00 Manuel D'utilisation

General
1.5

Transport

Please refer to the "Technical data" section for the packaging dimensions and packaging
weight
Improper transport
NOTICE!
Material damage due to improper transportation!
Transport units can fall or tip over if improperly transported.
This can cause a high degree of damage.
– Be careful when unloading the transport units on delivery and during
in-house transport in-house transport; observe the symbols and instructions
on the packaging.
– Only use the attachment points provided.
– Remove packaging just before assembly.
DANGER!
Risks when commissioning equipment which has been damaged during
transportation.
Installation or commissioning must not take place if any transport damage is
detected when unpacking the system.
By installing/commissioning damaged components, unmanageable errors may
occur, which may lead to irreparable damage to personnel and/or the system
with the use of aggressive dosing agents.
Transport inspection
NOTICE!
Check the delivery for completeness and any transport damage.
In case of visible damage, proceed as follows:
n Do not accept the delivery or accept provisionally.
n Note down the extent of damage in the transport documents or on the delivery slip.
Lodging a complaint.
n
Claim for any damages as soon as you notice them.
Damage claims can only be filed within the applicable period for complaints.
417102233 Rev. 3-03.2019 8