Measure Startup Current ("Inrush") - VOLTCRAFT VC731 Notice D'emploi

l) Measure Startup Current ("Inrush")
• Move the setting wheel (7) to the icon for current measurement "
" " (VC731). Observe the information on current measurement in chapter 11 j).
• To measure the startup current ("Inrush") (only possible at AC mode), select the symbol
" " with the navigation joystick (5). Confirm your selection by pushing the navigator
joystick ("ENTER"). The LC display indicates "INRUSH".
• The value is indicated on the LC display.
" (VC732) or
63