Measure Current Peaks ("Peak") - VOLTCRAFT VC731 Notice D'emploi

k) Measure Current Peaks ("Peak")
• Move the setting wheel (7) to the icon for current measurement "
" " (VC731). Observe the information on current measurement in chapter 11 j).
• To measure the current peaks (only possible at AC mode), select the symbol "
the navigation joystick (5). Confirm your selection by pushing the navigator joystick
("ENTER") for at least 2 seconds. The LC display indicates "PEAK".
• Terminate this mode by pushing the navigation button for at least 2 seconds ("ENTER").
• The value is indicated on the LC display.
62
" (VC732) or
" with