Smart Meter Installation - IMEON ENERGY HV Notice De Montage Et Guide De Montage

IMEON HV
1- Drill six holes in the marked locations for the 4 screws (minimum depth of 40mm Ø M7)
2- Drill six holes in the marked locations for the 4 screws (minimum depth of 40mm Ø M7)
3- Fit and fix with screws the IMEON on the wall plateand verify that the inverter is fixed securely.
5.4.

Smart Meter installation

WARNING: To prevent any risk of electric shock, make sure that the ground cable is
correctly connected to the earth ground before switching on and using the inverter.
Meter is used for monitoring the power usage for entire house, in the meantime,inverter
willalso need the data from Meter to achieve the Export Control Function.
It is necessary to connect meter to inverter otherwise inverter will shut down with a
"Meter fault"alert.
1. The Smart meter must be installed upstream of the inverter (public grid side).
2. Unscrew the top plate of the inverter.
IMEON HV – Guide d'installation / Installation guide – Rev A.4
FR
EN
FR
47