IMEON ENERGY HV Notice De Montage Et Guide De Montage page 53

IMEON HV
Insulate the cable on a length « L » of 6 to
7,5mm
Visually check the crimp
Step 5: Connect each input to the corresponding mounted connector of the inverter.
Connect negative pole (-) to negative PV input (PVx -) of the inverter.
Connect positive pole (+) to positive PV input (PVx +) of the inverter.
IMEON HV – Guide d'installation / Installation guide – Rev A.4
Insert the striped cable on the crimping tool, then
press
Insert the crimped-on contact into the insulator of
the male or female coupler until it clicks into place.
Pull gently on the lead to check that the metal part
is correctly engaged.
FR
EN
FR
53