Recommended Equipment; Mounting Unit - IMEON ENERGY HV Notice De Montage Et Guide De Montage

5.2.
and for the operator himself (electrical, thermal ...). The qualification of the worker and
the protective equipment must comply with the applicable standards and regulations.
Standard tools can be used for the installation of the IMEON. The following equipments
are those recommended for installation:
FR
EN
FR
5.3.
WARNING: This inverter is heavy! Please be careful when removing it from the
package
 Choose an appropriate place of support.
 Wall fixation should be done with the proper screws so that the solar inverter can be
WARNING:Suitable for mounting on concrete or other non-combustible surface only!
Take into account a space for ventilation between the case and the wall.
46
IMEON HV

Recommended equipment

This section does not specify the necessary protective equipment for the installation
 Crimping pliers for binding post and RJ 45,
 Screwdriver,
 Manual wrench,

drillers,
ØM5 et ØM7
 An Ethernet cable for meter installation.

Mounting unit

.
easily attached. After that, the device should be bolted on securely.
IMEON HV – Guide d'installation / Installation guide – Rev A.4