Wifi Connection (Optional); Inverter Start Up - IMEON ENERGY HV Notice De Montage Et Guide De Montage

IMEON HV

3.11. WiFi Connection (optional)

Wfi connection is available in option. Please check wifi manual for installation details.

3.12. Inverter Start up

Inverter can be started after checking all below steps:

Inverter fixed well on the wall.

Smart meter correctly connected

Battery is correctly connected without wrong polarity

PV is correctly connected without wrong polarity

Grid is correctly connected

EPS is correctly connected

All cables glands are correctly screwed

Top plate is correctly screwed

Inverter frame is connected to the ground
Once all is checked:

Turn on the external AC public grid breaker

Turn on the external AC Backup (EPS) breaker

Turn on the external PV breaker

Turn on the inverter PV breaker

Turn on the external battery breaker (start the battery if a manual start is required)

Press "Enter" button of the inverter during 5 seconds.
Once the inverter started:

The green led should be on

The red led should be off. If it is on, double check all above steps.

Follow the first start up settings. Other settings are available (refer to "Inverter
setting" section")
To shut down the inverter:

Select "Off" on "switch" inverter's menu

Turn off the PV breaker of the inverter

Turn off all external breakers
IMEON HV – Guide d'installation / Installation guide – Rev A.4
FR
EN
FR
57