Using The Memory - uebe visomat comfort eco Mode D'emploi

C

13. Using the memory

Measured results are automatically stored in the memory. The
memory can store up to 60 results and the average value. When
more than 60 measured values have been stored, the oldest
value (No. 60) is deleted to allow the latest value (No. 1) to be
recorded.
Recalling data
Press the Memory button to call up data.
The average value of the stored results is
displayed with "A", the values for systole,
diastole and pulse and the pulse pressure
(PP) are shown alternately in the display.
When the Memory button is pressed again,
the value measured last (No. 1) appears.
When the date/time function is activated,
systole, diastole and pulse are displayed
alternately with memory number and date,
followed by the pulse pressure (PP) and
the time.
Press the Memory button repeatedly to call
up further measured values.
The stored data remain visible in the dis-
play for around 30 seconds. The unit then
switches itself off.
EN-52
Operating the unit Operating the unit
Deleting data
To delete individual values, press the Memory button several
times to obtain the measured value required. Then press the
Memory button again and hold it down for 8-10 seconds until
the value first flashes and then disappears.
To delete the entiry memory, recall the relevant average value
display (A) and press the Memory button again, holding it down
until the mean value first flashes and then disappears.
C
EN-53