Removing The Appliance - Gaggenau AC270101 Notice D'utilisation Et De Montage

Installation
en
5 Insert the on-site cable for the lighting.
6 Remove the grease filter.
Note: Do not bend the grease filter to avoid
causing damage.
7 Open the odour filter cartridge.
8 Unpack the odour filter.
9 Insert the odour filter.
Note: Note the correct installation direction for the
odour filter.
50
10 Fit the grease filters.
11 Swing the filter cover up and ensure that it
engages.

Removing the appliance

m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
1 Cover the hob to protect it from damage.
Press the Æ button on the remote control.
2
The appliance moves down as far as it will go.
3 Place a scissor lift table or another suitable device
under the appliance.
4 Move the scissor lift table up until the tension on
the appliance cables is removed.
Notes
–
Place the appliance on the scissor lift table so
that the appliance and the frame are lying on it.
–
Do not place the appliance on the grease filters
as these could be damaged.
5 Disconnect the appliance from the power supply.
6 To protect against scratches, position a spacer on
the appliance.
7 Carefully loosen the screws on the frame cover.
Note: Do not use any tools. Ensure that lock nuts
do not fall into the opening in the appliance, in
order to prevent damage to the limit switch.
8 Place the frame cover down carefully.
9 Open the cable cover at the side using a
screwdriver.