Cleaning; Cleaning Appliance; Fitting And Removing The Metal Grease Filter - Gaggenau VL 040 715 Notice D'utilisation

Cleaning

9
WARNING
Risk of burns
The appliance grows hot during operation. Let
appliance cool down prior to cleaning.
9
WARNING
Risk of electrical shock
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure
cleaner or steam cleaner.
9
WARNING
Risk of injury
Components inside the appliance may have sharp
edges. Wear protective gloves.
NOTICE:
Surface damage
Do not use these cleaning agents
‒ Caustic or corrosive cleaners
‒ Oven cleaners
‒ Cleaners that are caustic, contain chlorine or are
aggressive
‒ Cleaners containing large proportions of alcohol
‒ Hard, scratchy dish-washing sponges, brushes or
scourers
If such an agent comes into contact with the appliance,
wipe it off immediately with water.
Thoroughly wash out new sponge cloths before using
them.

Cleaning appliance

Note: The appliance surface and control elements can
be scratched easily. You can order appropriate cleaning
agents or care products for your device using the
hotline or the online shop. Bear in mind the warranty
conditions in the enclosed service booklet and the
following cleaning information:
▯
Clean the surfaces with a soft, damp cloth and
dishwashing liquid or a mild window cleaner.
Moisten dried-on grime with a damp cloth. Don't
scratch!
▯
Only clean stainless steel surfaces in the direction
of the polish lines.
▯
Don't use stainless steel cleaner for control
elements.
Fitting and removing the metal grease
filter
1 Remove the ventilation grating.
2 Pull the metal grease filter up and out of the
appliance. Take out the positioning plate (if fitted).
Insertion is in the reverse sequence to removal. Insert
the positioning plate only if there is a side air outlet.
Insert the positioning plate such that the bend in the
middle is facing the air outlet.
13