Gaggenau AC270101 Notice D'utilisation Et De Montage page 51

10 Loosen the cable on the appliance from the
connecting terminal and from the strain relief.
11 Secure the cable on the appliance using the strain
relief so that it does not coil up.
Caution!
There is a risk of damage to the appliance if the
cable is coiled up. Always secure the cable firmly
using the strain relief so that it does not coil up fully
in the appliance.
12 Detach the on-site cable from the connecting
terminal and remove the protective tube.
13 Loosen the four cable clamps.
14 Open the cable tensioner and pull out the cables.
15 Thread the cables out of the frame cover.
16 Thread the cable on the appliance through the
opening in the frame cover and use the strain relief
to secure it.
Caution!
There is a risk of damage to the appliance if the
cable is coiled up. Always secure the cable firmly
using the strain relief so that it does not coil up fully
in the appliance.
17 Remove the diagonally opposite screws on the
frame.
18 Loosen the two other diagonally opposite screws,
move the frame and remove it.
Installation
en
51