Scheppach DS930 Traduction Des Instructions D'origine page 20

Personal safety
a.) Pay attention to what you are doing and use
power tools sensibly. Do not use power tools
when you are tired or under the influence of
drugs, alcohol or medication. A single moment
of inattention while using power tools may cause
severe injury.
b.) Wear personal protective equipment and
safety goggles. Wearing personal protective
equipment such as a dust mask, non-skid safety
boots, a protective helmet or hearing protection
according to the type and application of the power
tool reduces the risk of injury.
c.) Avoid starting the power tool unintentionally.
Make sure that the power tool is switched
off before you connect it to the mains and/or
insert a battery, pick it up or carry it. lf you
have your finger on the switch when you carry the
power tool, or if the machine is switched on when
you connect it to the mains, this may result in ac-
cidents.
d.) Remove adjustment tools or wrenches before
switching on the power tool. Tools or wrenches
in rotating machine parts may cause injury.
e.) Avoid abnormal body positions. Stand secure-
ly and keep your balance at all times. By doing
so, you can control the power tool more easily in
unexpected Situations.
f.) Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose cloth-
ing, jewellery or long hair may be trapped in mov-
ing parts.
g.) lf dust extraction tools or collection bins can
optionally be attached, you must make sure
that they are connected and correctly used.
Using dust extraction tools may reduce risks
caused by dust.
Use and treatment of the power tool
a.) Do not overload the tool. Use the appropriate
power tool for your type of work. With appro-
priate power tools, you can work better and more
safely within the given power range.
b.) Do not use power tools with defective switch-
es. Power tools which cannot be switched on or
off are dangerous and must be repaired.
c.) PuII out the plug from the socket and/or re-
move the battery before you make settings to
the tool, replace accessory parts or put aside
the power tool. These precautionary measures
will prevent the power tool from starting uninten-
tionally.
20 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
d.) Keep power tools which are not in use away
from children. Only persons who are familiar
with the power tool and who have read the op-
erating instructions may use the power tool.
Power tools are dangerous if used by inexperi-
enced persons.
e.) Maintain power tools with care. Check mov-
ing parts for proper function and smooth
running, and check whether there are parts
which are broken or damaged to the extent
that the functionality of the power tool is im-
paired. Have damaged parts repaired before us-
ing the power tool. Many accidents are caused by
poorly-maintained power tools.
f.) Keep cutting tools sharp and clean. Carefully
maintained cutting tools with sharp edges are less
likely to jam and can be guided more easily.
g.) Use power tools, accessory parts, insertion
tools, etc. in compliance with these instruc-
tions. Take into account the working conditions
and the activity which is to be carried out. Using
power tools for applications other than those in-
tended may cause dangerous Situations.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Service
a.) Have your power tool repaired by qualified
specialists only, and always use original
spare parts for repair. This is to maintain the
safety of the power tool.
Machine-related safety instructions
a.) This machine is designed for sanding. Please
read all of the safety information, instructions, il-
lustrations and descriptions delivered with the
machine. If the following instructions are not ob-
served, this can result in an electric shock, fire
and/or serious injury.
b.) Do not use this machine to perform work
such as roughing, brushing, polishing or disc
sanding. Performing tasks for which the machine
is not designed can create hazards and lead to
injury.
c.) Never use accessories that were not specially
developed and intended for this machine. Just
because an accessory part can be fitted on your
machine does not guarantee danger-free opera-
tion.