Maintenance And Cleaning; Electric Shock - Abicor Binzel PP Plus 36D Mode D'emploi

7 Maintenance and cleaning

7 Maintenance and cleaning
Regular cleaning, however, is a prerequisite for a long life and a trouble-free operation.
DANGER
Risk of injury due to unexpected start-up.
The following instructions must be adhered to for the entire duration of maintenance,
servicing, mounting, dismounting and repair work:
• Switch off the power source.
• Close the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Close off the compressed air supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
DANGER

Electric shock

Dangerous voltage due to defective cables.
• Switch off the power supply.
• Check all live cables and connections for proper installation.
• Replace any damaged, deformed or worn parts.
DANGER
Risk of burns
Risk of burns from hot coolant and hot surfaces.
• Switch off the coolant recirculator before starting maintenance, servicing, assembly,
disassembly or repair work.
• Allow the welding torches to cool down.
• Wear the correct protective gloves.
NOTICE
• Maintenance and cleaning work may only be carried out by qualified personnel
(in Germany see TRBS 1203).
• Check coolant hoses, seals and connections for damage and tightness and replace them,
if necessary.
• Always wear your personal protective equipment when performing maintenance and
cleaning work.
EN - 16
PP Plus 36D/240D/401D
BAL.0140 • 2018-10-15