Designated Use; Classification Of The Warnings - Abicor Binzel PP Plus 36D Mode D'emploi

PP Plus 36D/240D/401D
1 Identification
The PP Plus hand-held welding torches are used for welding of standard wire electrodes. They
conform to EN 60 974-7 and are not considered devices having their own functions. Arc
welding can only be carried out in connection with a welding power supply. These operating
instructions only describe PP Plus welding torches. PP Plus welding torches may only be
operated using original ABICOR BINZEL spare parts.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The enclosed safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose described in
these instructions in the manner described. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.

2.2 Classification of the warnings

The warnings used in the operating instructions are divided into four different levels and are
shown prior to potentially dangerous work steps. Arranged in descending order of importance,
they have the following meaning:
DANGER
Describes imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or minor
injuries.
BAL.0140 • 2018-10-15
1 Identification
EN - 3