Abicor Binzel PP Plus 36D Mode D'emploi page 20

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical Data
3.2 Signs and symbols used
4 Putting into operation
4.1 Equipping the torch neck PP
Plus 36D/240D
4.2 Equipping the torch neck PP
Plus 401D
4.3 Mounting the wire guide
4.3.1 Liner
4.3.2 PA liner
4.4 Mounting the neck liner in the
torch neck
4.5 Attaching the cable assembly
on the machine side
4.6 Connecting the coolant
4.7 Connecting the PP Plus
control lead
EN - 2
EN-3 4.8
EN-3 4.9
4.10
EN-3 4.11
EN-3
EN-3 5
EN-4
6
EN-4
EN-4 7
EN-5 7.1
7.2
EN-6 7.3
EN-7 8
EN-7
EN-8
EN-8
EN-9
EN-10
EN-11
EN-11
EN-12
PP Plus 36D/240D/401D
Setting the shielding gas
Feeding in the wire
Torch handle control elements
2-cycle function of the trigger
Operation
Putting out of operation
Maintenance and cleaning EN-16
Replacing the wire feed roll
Cleaning the wire guide
Replacing the torch neck
Disposal
BAL.0140 • 2018-10-15
EN-13
EN-13
EN-14
EN-15
EN-15
EN-15
EN-17
EN-17
EN-18
EN-18