Table 4.2: Amx System Mib Object Groups; Table 4.3: Amx System Mib Trap Files - Avocent AMX Switch Serie Guide D'installation

74 AMX Switch Series Installer/User Guide
7. Press and
9
SNMP trap you wish to enable or disable and
8. Press and
0
- or -
Press and
x
See Users on page 43 and Forcing a connection using SNMP on page 69 for information on adding
an SNMP user and assigning rights to the SNMP user.
Managing AMX switch objects with SNMP
Using SNMP, you can monitor and manage MIB (Management Information Base) objects specific
to the AMX switch. Refer to Table 4.2 for a description of the AMX system MIB object groups.

Table 4.2: AMX System MIB Object Groups

Object Group
amxAppliance
amxAmiq
amxUserStation
amxStats
amxSnmp
Load the AMX-MIB file into your SNMP browser to start monitoring and managing AMX switch-
specific objects. Once you have enabled the sending of traps on the AMX switch, these traps can be
interpreted by the SNMP trap listener by using the trap-specific MIB files. The following table
describes the MIB files required for the SNMP processing.

Table 4.3: AMX System MIB Trap Files

Trap File
AMX-MIB
AMX 5000-TRAP-MIB
AMX 5010-TRAP-MIB
AMX 5020-TRAP-MIB
AMX 5030-TRAP-MIB
Exit
This menu selection will return you to the ready prompt.
to display the SNMP Trap Configuration Menu. Press the number of each
Enter
to apply and store all changes.
Enter
to restore settings as they were before changes were made.
Enter
Purpose
Provides general information about the AMX switch, including firmware and
hardware revisions
Provides a list of available IQ modules from the AMX switch
Provides a list of user stations connected to the AMX switch
Provides statistics on packets for each port (only available internally)
Provides information on SNMP settings
Purpose
Used by the SNMP Browser/Manager to monitor/manage the AMX switch
SNMP traps for the AMX 5000 switch
SNMP traps for the AMX 5010 switch
SNMP traps for the AMX 5020 switch
SNMP traps for the AMX 5030 switch
.
Enter