Scanning The Switching System; Figure 3.8: Information Screen; Figure 3.9: Target Screen - Avocent AMX Switch Serie Guide D'installation

Figure 3.8: Information Screen

To return to the Device Admin screen, click Close. To exit the OSCAR interface, click X.
6.

Scanning the switching system

You can use the Scan connection mode to monitor multiple target devices in sequence.
To scan an AMX switching system:
1. Press
Ctrl+Ctrl
Click the Target tab, then select Scan.
2.

Figure 3.9: Target Screen

3. Press and hold the
to scan. Alternately, if you wish to select a group of target devices in sequence, you can click
the first target device in the sequence, press and hold the
device to highlight the group. Clicking Clear will deselect all of target devices in the list.
Click the Start button to begin scanning.
4.
to launch the OSCAR interface.
key while you individually select the target devices that you would like
Ctrl
Chapter 3: Operations
key and select the last target
Shift
41