Viewing Mdm Target Device Information; Figure 3.7: Set Position Screen - Avocent AMX Switch Serie Guide D'installation

40 AMX Switch Series Installer/User Guide
f. To set a hotkey – Select a hotkey from the Hotkey drop-down list. If the target flag is
displayed, entering this hotkey will hide the flag. Conversely, if the target flag is hidden,
entering this hotkey will display the flag.
g. To set the flag position – Click Set Position. The Set Position screen displays.

Figure 3.7: Set Position Screen

Move the target flag by dragging and dropping the title bar of the Set Position screen to a
desired position.
After placing the target flag in the desired position, click X to set the position and return to
the Target Flag screen.
-or-
Press
Esc
To save changes, click Apply. To exit the OSCAR interface, click Cancel or X.
5.

Viewing MDM target device information

The AMX switch systems supports seamless (MDM) target devices.
To view MDM target device information:
1. Press
Ctrl+Ctrl
2. Click the Admin tab. The Device Admin screen displays.
3. Select the MDM target device for which you wish to view version, configuration and
connection information.
4. Click the Edit Device button.The Edit Device screen displays.
5. Click the Info button. The Information screen displays.
to return to the Target flag screen without saving the new position.
to launch the OSCAR interface.