User Stations; Figure 3.21: Information Screen; Figure 3.22: Status Screen - Avocent AMX Switch Serie Guide D'installation

Figure 3.21: Information Screen

6. Click Close to return to the Device Admin screen.
7. Click Cancel or X to exit the OSCAR interface.
To modify IQ module properties, see Setting Device Properties on page 58.

User Stations

You can configure settings specific to your user station by accessing the Console tab.
To view the user station status:
1. Press
Ctrl+Ctrl
2. Click the Console tab. The Status screen displays the connection status of the AMX
user station.

Figure 3.22: Status Screen

Click Close or X to exit the OSCAR interface.
3.
to launch the OSCAR interface.
Chapter 3: Operations 55