Disabling Auto User Login; Equalization Tuning; Figure 3.31: Equalization Tuning Screen - Avocent AMX Switch Serie Guide D'installation

To reset the keyboard and mouse:
1. Press the default Command Line hotkey sequence to display the Command Line.
2. Type and press
rk
- or -
Type and press
rm

Disabling Auto User Login

Auto User Login at the user station can only be enabled by the Administrator, but it can be disabled
by any user.
To disable auto user login:
1. Press the default Command Line hotkey sequence to display the Command Line.
2. Type
disable auto user login
See Locking user station settings on page 56 for more information about Auto User Login settings.

Equalization tuning

To adjust the video quality of the monitor connected to your user station, you may manually tune
the equalization values that are applied during video compensation.
To edit equalization offset values:
1. Press the default Command Line hotkey sequence to display the Command Line.
2. Type
equalization tuning

Figure 3.31: Equalization Tuning Screen

3. Select Enable to allow manual adjustment of equalization offset values.
4. Select the color(s) you wish to adjust. You may adjust colors individually or as a group.
5. To increase the offset value of the selected color(s) by increments of one, use the
key.
Plus
To decrease the offset value of the selected color(s) by increments of minus one, use the
key or
Minus
to reset the keyboard.
Enter
to reset the mouse.
Enter
and press
and press
Enter.
key.
Enter.
The Equalization Tuning screen will be displayed.
Chapter 3: Operations
key or
Up
Down
63