Amx User Station; Front Panel Leds; Figure 2.15: Amx User Station Front Panel - Avocent AMX Switch Serie Guide D'installation

30 AMX Switch Series Installer/User Guide
• Server port LEDs – Each LED corresponds to a server port and illuminates in green when the
server or cascaded AMX switch is attached and powered up.
• LAN and Power LEDs – The green LAN LINK LED illuminates when a valid connection is
made to the network port of the AMX switch. The amber LAN 100M LED indicates the speed
of the attached LAN. This LED illuminates when a 100Mb connection is made or remains unlit
when a 10Mb connection is made. The green/amber PWR LED is amber when the AMX
switch is powered up and green when the AMX switch is operating.
• User port LEDs – Each LEDs correspond to a user port and illuminates in green when the
AMX user station or cascaded AMX switch is attached and powered up.

AMX user station

Front panel LEDs

There are two blue LEDs on the front panel of the AMX user station.
Power LED
Active LED

Figure 2.15: AMX User Station Front Panel

• Power LED – The upper LED is illuminated when power is connected and off when power
is absent.
• Active LED – The lower LED blinks when the OSCAR interface is displayed and is
illuminated when there is a valid connection between the AMX user station and an AMIQ or
AMIQDM module or an AMX switch.
Back panel LEDs
The back panel of the AMX user station has two LEDs mounted on each RJ-45 port.