lifter PX 25 Manuel D'utilisation Et D'entretien page 16

MAINTENANCE (20.7)
Maintenance and repair must be carried out by specialized personnel.
It is forbidden to introduce modifications to the fork truck as well as to use it when it no longer responds to the security
criteria.
After repairs the dismantled parts and the discharged products must be eliminated with respect to safety and environmental regualtions It is forbidden to use inflammable products for the cleaning of the fork truck.
The spare parts supplied by the Manufacturing Firm are the only ones accepted as substitution parts.
A) LOWERING ADJUSTMENT (see fig.C):
See paragraph Adjustment of the command lever
B) OIL LEVEL (see fig.D)
Check the oil level every 6 months. Use hydraulic oil, excluding motor and brake oil. OIL VISCOSITY 30 cSCt at 40°C ; TOTAL VOLUME 0.3 l.
With the forks totally lowered carry out the following operations:
- Remove the protective oil pan from the tank (2) and the cap (3)
- If necessary add oil up to 20mm from the top edge of the tank
- Work the pump several times to let the air out of the hydraulic circuit
- Reassemble in the opposite order the cap (3) and the protection (2)
GENERAL WARRANTY TERMS AND CONDITIONS (27.7)
The Manufacturer warranties products sold on the market in compliance with the terms and conditions provided for by current laws. In particular, the warranty is valid for 12 months starting from the date of
purchase of the product on behalf of the customer and user, as documented by the receipt of sale. To be eligible for the warranty, the customer and user must present a document that clearly proves the date of
purchase of the product. All repairs under warranty must be carried out by and/or requested at a service centre authorized/certified by Lifter. No repairs may be carried out prior to authorised repairs, on pain of
rendering the warranty null and void. The Manufacturer will repair and or replace, at Manufacturer's discretion, any part that should prove defective within the scope of ordinary use, through a service centre
authorized by the Manufacturer. The Manufacturer reserves the right to make final decisions regarding the approval of warranty claims. Each product must be subject to regular maintenance according to the
documentation supplied and only original spare parts may be used. Any component replaced under warranty becomes the property of the Manufacturer. All replacement components substituted under warranty
will be considered a part of the original product and, consequently, the warranty for such components will expire along with that of the original product. The warranty is not transferrable; therefore, any warranty
claim must be submitted by the original owner. The warranty is limited to the replacement of parts (and the cost strictly tied to replacement) that have presented a manufacturing defect or assembly fault. The
warranty does not cover any other liability and/or obligation as regards additional expenses, as well as direct and/or indirect damage or losses due to both total and partial use and/or impossibility of use. The
warranty on original spare parts is valid for 6 months starting from the date of purchase on behalf of the customer and user, as documented by the receipt of sale. Repairs carried out during the warranty period are
to be considered ex reseller or ex the authorized service centre closest to the customer's office. The product must be submitted at the location where the warranty may be claimed, free of alterations and devices
and/or accessories installed, with the exception of those already present at the moment of sale.
This warranty does not cover:
A) Defects caused by contaminated oils or fuels, or those due to the use of inappropriate fuels, oils or lubricants.
B) Packaging or transportation costs relative to the warranty claim.
C) Products that have been modified or altered without prior written authorisation on behalf of the Manufacturer.
D) Defects due to, but not limited to, normal wear and tear, accidents, improper use, abuse, negligence, improper installation and use.
E) Collisions, fires, floods and/or other accidental events, including those geological or atmospheric events.
F) Costs due to delays in repairs or replacement of defective parts or rental of equipment used during repairs.
APPENDIX - Extensions to the Warranty
"GS" & "PREMIUM" series Pallet trucks
The warranty period for "GS" and "PREMIUM" series pallet trucks for the customer user is 36 months starting from the date of purchase for all parts excluding materials subject to wear. The date of purchase is
that which appears on the receipt of sale.
Batteries: Batteries are considered as wear components, subject to maintenance and operation instructions described
on user manuals. Warranty voids in case of user manual instructions are not punctually applied on batteries
The Manufacturer excludes all other warranty conditions, terms, representations and undertaking whether express or implied. This warranty may be modified only by the Manufacturer, in writing. This warranty
entails specific legal rights, as well as other rights that may vary from one country to another.
Casole D'Elsa, (Italy)
15