Requirements For The Installation Location - Graef ES 80 Notice D'utilisation

Espresso Machine ES 80 / ES 81
Scope of delivery and
shipping inspection
EN
The unit comes standard with the
following components:
Espresso Machine
●
Double filter basket
●
● Single filter basket
● 600 ml jug
Group handle
●
Cleaning tool
●
Measuring spoun
●
● Tamper
● Instruction manual
important!
Check the delivery for
►
completeness and for visible
damage.
Immediately notify the car-
►
rier, insurance company and
the supplier about an incom-
plete delivery or damages
due to improper packing or
caused by shipping.
Unpacking
To unpack the unit, proceed as
below:
Take the unit out of the carton.
‹
Remove all pieces of the pa-
‹
cking.
Remove
‹
tant labels
(not the rating plate).
32
any possibly ex-
on the unit.
Dispose of the packing
The packing protects the unit
from shipping damage. The pa-
cking materials are selected for
their environmental compatibility
and from disposal aspects so they
are recyclable.
Returning the packing to the ma-
terials circuit saves raw materials
and reduces the accumulation of
waste. Dispose of packing mate-
rial that is no longer needed at a
collection point for the »Green
Point« recycling system.
important!
If possible, save the original
►
packing during the unit's
warranty period to be able
to properly pack the unit in
case of a warranty claim.
Requirements for the ins-
tallation location
For safe and flawless opera-
tion of the unit, the place of
location must meet these prere-
quisites:
■ The unit must be set up on a
firm, flat, level, non-slip and
heat resistant base that has suf-
ficient load bearing capacity.
■ Select the place of location so
that children cannot reach the
hot surfaces of the unit.
■ The unit is not intended for
installation in a wall or a
built-in cupboard.