Making Hot Water - Graef ES 80 Notice D'utilisation

Espresso Machine ES 80 / ES 81
note
We recommend limiting the
serving time to ca. 60 sec-
onds.
Turn open the control knob
‹
again.
By closing the valve and due
‹
to the steam cooling off a vac-
uum arises in the milk frother
nozzle which then draws some
more milk.
For that reason, please wait a
‹
moment before you pull the
milk frother nozzle out of the
milk.
After frothing, briefly knock
‹
the milk can on the table top
to remove the last of the large
air bubbles.
Swirling also helps uniformly
‹
distribute the froth.
Clean the milk frother nozzle
‹
immediately after finishing the
process using a moist cloth.
However, let the pipe cool
down for a few moments as it
becomes very hot.
Also clean the milk frother noz-
‹
zle with a short blast of steam
so that the milk remnants are
blown out of the milk frother
nozzle.

Making hot water

Press the "HOT WATER" but-
‹
ton.
The hot water function is now
‹
active.
After the lamp has stopped
‹
flashing, the nozzle is ready for
use.
Make sure there is always
‹
enough water in the tank.
Turn the steam milk frother/hot
‹
water nozzle to the outside.
Set a container under the milk
‹
frother/hot water nozzle.
cautioN
Never turn the milk frother/hot
water nozzle towards yourself
or any other person. DANGER
OF BURNS!
To move the milk frother/hot
water nozzle, always use the
handle; never touch the milk
frother/hot water nozzle on the
pipe after using. It becomes
very hot!
Turn the control knob open.
‹
Hot water now flows from the
‹
nozzle into the container.
After completing the process,
‹
close the rotary control again.
© Gebr. Graef GmbH & Co. KG - 03
EN
41