Hot Water Withdrawal; Descaling - Graef Milegra Instructions D'utilisation

• After frothing, gently swivel the milk jug in a circle and gently tap the bottom
of the jug onto the tabletop to lift in coarse air bubbles and distribute the milk
foam evenly.
• Wipe the steam plant with a damp cloth after a sufficient allowed time for cool-
ing. Caution: It can still be very hot immediately after use.
WARNING
• To froth milk, only use the attached milk jug or a larger vessel. Do not use a
cup. Excessively frothing milk may lead to burns.
• Never direct the steam plant to yourself or others. There is a risk of burning.
Please note:
If the milk is heated up to more than 70°C, the foam will simply collapse and the
drink will later taste too sweet or even of burned milk.
Tips for making milk froth
Use cold milk from the refrigerator, it heats up slowly and leaves enough time to
foam.
To practise it, you can use the following method:
• Pour cold water into the milk jug.
• Add a drop of detergent.
• Foam everything as described above.
• If you foam properly, the mixture should look like real milk foam.
• Please do not drink this mixture!

HOT WATER WITHDRAWAL

If the unit is switched off, switch it back on again
• Put one cup under the hot-waterlance.
• Turn the rotary knob to
• Water flows into the cup.
• When the process is completed, turn the rotary knob to .

DESCALING

If the descaling display
descaling tablets, which are especially matched to our appliances. You can obtain
them in our online shop at www.graef.de under item No. 145618 or from your
specialist dealer.
IMPORTANT!
We accept no liability for missing or insufficient decalcification. In this
case, the warranty will become null and void.
• Switch the machine off.
• Remove the group handle.
• Take a small brush, clear the section in the brewing unit, and remove all old coffee
. Steam light switch on.
lights up, please descale your device. Use only Graef
.
DE
EN
FR
NL
IT
ES
DK
39