Kuhn Rikon DUROMATIC Mode D'emploi page 82

8.2 Cooking at 1
(Gentle cooking)
8G
8H
8I
8.3 Correcting settings that have been made on the
TIMAX module (RESET function)
Simultaneously press the UP and DOWN buttons.
Re-setting: follow the instructions from point 2, section 8.1.
The TIMAX has now been set.
Once the TIMAX module has been correctly set, no further manipulations
should be carried out on the pressure indicator or the settings.
The TIMAX module can be removed from the lid once the desired
cooking level has been reached (bleep sound).
74
st
ring with the TIMAX module
Setting the cooking time:
Carry out steps 1 to 4 as above.
(See section 8.1)
5. Setting cooking level 1:
press the DOWN button
(Fig. 8G).
6. Confirming cooking level 1:
press the middle START button (Fig. 8H).
The module again responds by sounding
a bleep.
Cooking at cooking level 1 has now been set.
Example Fig. 8l:
Cooking level 1 for 5 minutes.