Image Stabilizer Function; Fade In/Out Functions - Panasonic PV-GS9 Mode D'emploi

2 Push the [W/T] Lever
towards [T] to zoom in or out.
26
To Cancel the Digital Zoom Function
Set [TAPE RECORDING MENU] >> [CAMERA] >>
[D.ZOOM] >> [OFF].
• For other notes concerning this item, see page 62.

Image Stabilizer Function

If the Camcorder is shaken while recording, the
camera shake in the image can be corrected.
• If the Camcorder shakes too much, the images may
not be stabilized.
1 Set [TAPE RECORDING MENU] >> [CAMERA]
>> [EIS] >> [ON].
19
13 14 15 16 17
• The [EIS] Indication appears.
2 Press the Recording Start/Stop Button
[PHOTO SHOT] Button
36
43
To Cancel Image Stabilizer Function
Set [TAPE RECORDING MENU] >> [CAMERA] >>
[EIS] >> [OFF].
• For other notes concerning this item, see page 62.
28
Recording Mode
towards [W] or
26
or
43
to start recording.
36

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually from
a black screen at the beginning of a scene.
1 Keep pressing the [FADE] Button
the Recording Pause Mode.
16
• The image fades out gradually.
2 When the image is completely gone, press
the Recording Start/Stop Button
recording.
43
3 Release the [FADE] Button
seconds after recording starts.
• The image reappears gradually.
Fade Out
Fade Out causes images and sounds to disappear
gradually, leaving a black screen at the end of a scene.
1 Keep pressing the [FADE] Button
recording.
16
• The image fades out gradually.
during
16
to start
43
about 3
16
while
16