Quick Guide; Before Use - Panasonic PV-GS9 Mode D'emploi

Quick Guide

1 Attach the Battery to the AC Adaptor and
charge it.
• Before use, fully charge the Battery.
• Since the Battery will not be charged when the DC
Cable is connected to the AC Adaptor, disconnect
it from the AC Adaptor.
• The [POWER] Lamp and [CHARGE] Lamp light
up, and charging starts.
• When the [CHARGE] Lamp goes off, charging is
completed.
2 Attach the charged Battery to the Camcorder.
Inserting a Cassette
1 Slide the [OPEN/EJECT] Lever
front and pull down to fully open the Cassette
Compartment Cover.
• To protect the tape, if the cover is not fully opened,
the cassette cannot be ejected.
2 Insert a Cassette.
3 Close the Cassette Holder by pressing the
[PUSH] mark .
2
4 Close the Cassette Compartment Cover by
pressing the mark
2
10

Before Use

toward the
1
1
.
3
3
Inserting a Card
(For PV-GS13/PV-GS15)
1 Place your Thumb on the [OPEN▼] Knob
and pull the LCD Monitor
direction of the arrow.
1
2
2 Slide the [OPEN] Lever
Slot Cover .
4
3 While holding the Memory Card with its cut
corner facing right insert it into the Card
5
Slot .
6
4 Close the Card Slot Cover
3
Recording on a Tape
1 Set the [OFF/ON] Switch
• The [POWER] Lamp
2
1
2
2 Set the Mode Dial to Tape Recording Mode.
(PV-GS13/ (PV-GS9)
PV-GS15)
3 Press the Recording Start/Stop Button.
• Recording starts.
4 Press the Recording Start/Stop Button again
to pause the recording.
1
out in the
2
to open the Card
3
securely.
4
4
6
5
to [ON].
1
lights up.