Using The Dv Studio 3.1E-Se (Pv-Gs13: Supplied; Pv-Gs9/Pv-Gs15: Optional Software) - Panasonic PV-GS9 Mode D'emploi

Using the DV STUDIO 3.1E-SE
(PV-GS13: Supplied; PV-GS9/PV-GS15:
Optional Software)
Following Software is not supplied for models PV-GS9
and PV-GS15;
• LSFT0577 (DV STUDIO 3.1E-SE)
• K1HA05CD0005 (USB Cable)
The Software allows you to capture a still image from
your motion video on the tape and transfer to a PC.
Operating environment
OS:
IBM PC/AT compatible personal computer with
preinstalled;
Microsoft Windows XP Home Edition/Professional
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium II/Celeron 300 MHz or higher
(including compatible CPU)
Graphic display:
High Colour (16 bit or more)
Desktop resolution of 800 x 600 pixels or more
RAM:
32 MB or more (64 MB or more recommended)
(128 MB or more required for Windows XP
(256 MB or more recommended))
Free hard disk space:
At least 20 MB
Ports:
USB Jack
Other requirements:
Mouse
• The DV STUDIO 3.1E-SE cannot be operated on
Windows 2000.
• When 2 or more USB devices are connected to a
personal computer, or when devices are connected
through USB hubs or by using extension cables,
proper operation is not guaranteed.
• When connected to the keyboard USB Jack, normal
function may not be possible.
• This instruction manual describes only the
procedures for installation, connection and startup.
Please read the PDF-based instructions for how to
use the DV STUDIO 3.1E-SE.
• To view the installed operating instructions, Adobe
Acrobat Reader 5.0 or higher is required. Please
install Adobe Acrobat Reader from the CD-ROM
(PV-GS13: Supplied; PV-GS9/PV-GS15: Optional
Software).
• Before using for the fi rst time, select [Readme] from
[Start] >> [All programs (Programs)] >> [Panasonic]
>> [DV Studio3], and read any supplementary details
or updates.
54
With a PC
Installing DV STUDIO 3.1E-SE
(PV-GS13: Supplied; PV-GS9/PV-GS15:
Optional Software)
1 Turn on the personal computer and start up
Windows.
2 Insert the CD-ROM into the personal
computer's CD-ROM drive.
• Quit all applications.
• The [Setup Menu] Screen appears.
3 Click [DV STUDIO].
4 Click [Next].
• After reading the displayed contents, please carry
out the installation according to instructions.
5 After the completion of setup, click on [Finish].
• Installation will be completed.
• Sample data is installed concurrently with the DV
STUDIO 3.1E-SE software.