Pc Connection With Dv Interface Cable - Panasonic PV-GS9 Mode D'emploi

Recorder:
3 While pressing the [ REC] Button
the [PLAY] Button
Or while pressing the [REC] Button
the [BACK LIGHT] Button
Camcorder.
7
10
• Recording starts.
To Stop Dubbing
Press the [ ] Button
CAUTION:
Unauthorized exchanging and/or copying of
copyrighted recordings may be copyright
infringement.
• For other notes concerning this item, see page 65.
PC Connection With DV Interface
Cable
A video clip can be transferred directly to your PC
(Personal Computer) via a DV Interface Cable (Optional)
using products and software from a number of video
editing software companies.
Using products from video editing software companies
allows you to capture and edit video clips using the DV
Interface.
Our DVC being OHCI compliant should
have no problem working with any OHCI
compliant Firewire Card/video - Editing
software package.
• Personal Computer must be equipped with an DV
Terminal.
• During Camcorder playback, do not disconnect the
DV Interface Cable or turn the Camcorder off as this
may cause a PC hang-up error.
• 1394 (i.LINK) Interface must conform to OHCI (Open
Host Controller Interface Specifi cation).
• DV STUDIO 3.1E-SE (PV-GS13: Supplied,
PV-GS9/PV-GS15: Optional Software) allows you to
capture a still image from your motion video on the
tape and transfer it to a PC.
46
Editing Mode
, press
54
on the Remote Control.
72
, press
7
on the
10
or the [ ] Button .
69 70