Starting Procedure - EINHELL FREELEXO BT Instructions D'origine

Starting procedure

1. Unlock the control panel (2).
2. Press the "START / 2" button (63) fi rst.
3. To confi rm the starting procedure, press the
"OK" button (61).
The robot lawn mower will now operate in ac-
cordance with the mowing time setting. The batte-
ry charge level is monitored during the work time
and displayed via the battery LED (52). Whenever
the battery charge level drops to 30%, the robot
lawn mower automatically returns to the charging
station (19).
Stopping mowing
1. To bring the robot lawn mower to an immedia-
te stop, press the STOP button (3).
2. Unlock the control panel (2).
3. Press the "HOME / 3" button (64) followed by
the "OK" button (61) to send the robot lawn
mower along the perimeter wire (18) and
back to the charging station (19).
6.6 Control of the robot lawn mower using
the app
All settings that you can make using the control
panel can also be made using the app. To do
so, fi rst download the Einhell app for robot lawn
mowers to your smart phone. The Einhell app is
available via the following link and QR code:
iOS: http://qr.einhell.com/12e103ce
Android: http://qr.einhell.com/176c0443
Use a Bluetooth connection to connect the robot
lawn mower with your smart phone and follow the
steps shown there. You can also use the app to
use the following additional functions of the robot
lawn mower:
Anl_FREELEXO_BT_SPK13.indb 40 Anl_FREELEXO_BT_SPK13.indb 40
GB
•
Mowing time settings:
The app gives you additional options for
mowing time settings, e.g. a daily individual
mowing time setting.
•
Rain sensor
The rain sensor (5) can be switched on and
off in the app. The default factory setting for
the sensor is "On".
•
Multi-starting point
Where gardens have lots of angles, the robot
lawn mower may have problems reaching
every part of the lawn and mowing it comple-
tely. In this case you can select several star-
ting points on the perimeter wire (18). This will
enable the robot lawn mower to get to even
those parts of your garden that are diffi cult
to reach. The robot lawn mower will run the
selected distance along the perimeter wire
(18) and then start mowing in this part of the
garden (Fig. 9c). The charging station (19) is
automatically defi ned as starting point 1. The
two other starting points can be selected as
you wish. For this you must measure the dis-
tance between the charging station (19) and
the starting point in clockwise direction along
the perimeter wire (18). With the frequency
setting you decide how often the robot lawn
mower starts its work from the charging sta-
tion (19) or from the respective starting points.
•
Mowing edges
For a tidy lawn edge, the "Edge mowing"
setting can be activated in the app. The robot
lawn mower starts its mowing work every 7
work days by first mowing once along the en-
tire perimeter wire (18). In addition, the robot
lawn mower mows on the way to the charging
station at the end of the daily mowing interval,
if the charge level of the rechargeable battery
is over 70%.
•
Mower statistics
This provides you with information about a
range of mower statistics.
Instructions concerning the Bluetooth con-
nection:
•
Connect to the robot lawn mower in the Ein-
hell App after you have logged in as user and
registered the unit.
•
In the case of Android units you must get
approval of the location for the Einhell App in
order to use the Bluetooth connection.
•
Connect the robot lawn mower only through
the Einhell App on your smart-phone.
•
Use the Einhell app to establish a connection
to the robot lawn mower.
- 40 -
22.09.2021 10:12:12 22.09.2021 10:12:12