Beem Samowar 2017 Mode D'emploi page 36

33
7. Check the mains cable regularly for any damage.
The housing and the outside of the teapot should be cleaned regularly to remove any
dust, fi ngerprints or other marks and streaks. For this purpose, we recommend the
BEEM premium cleaning cloth. This specially impregnated cloth gets rid of dust and
unsightly fi ngerprints in next to no time – it does not scratch and is particularly gentle to
the material. An additional cleaning agent is not required. The BEEM premium cleaning
cloth can be obtained from selected specialist stockists, directly via our website www.
beem.de or from our customer service department on request.
Cleaning the Teapot
Over time tea residues may stain teapots. They should therefore be thoroughly cleaned
regularly (at least every 4 weeks).
We recommend that you do this using BEEM premium cleaning tablets. They will
remove the residues quickly and easily. In addition, the cleaning tablets are gentle on the
material and guarantee food-safe cleaning - ensuring an authentic tea fl avour. BEEM
premium cleaning tablets can be obtained from selected specialist stockists, directly
via our website www.beem.de or from our customer service department on request.
Cleaning with the BEEM Premium Cleaning Tablets
1. Dissolve one cleaning tablet in water at 60 – 70°C.
2. Pour the solution into the teapot (2).
3. Close and move the teapot to ensure that the inside is wetted with the cleaning solution.
4. Let the cleaning solution take effect for a few minutes.
5. Empty out the cleaning solution and thoroughly rinse the teapot several times.
The BEEM cleaning tablets do not have any descaling eff ect!
Descaling
Limescale deposits have an adverse effect not only on the quality of the tea and the water,
but they also cause power losses and shorten the lifespan of the device. The thicker a
limescale layer is, the more diffi cult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in
accordance with the water quality in your area and how often the device is used (approx.
every 2 – 6 weeks).
The fi rst indications that descaling is required are a large amount of steam being produced
and slower boiling of the water. Limescale deposits on the bottom of the reservoir in sam-
ovars can cause the device to switch off prematurely.
07123_DE-EN-FR-ES-IT_A5_V1.indb 33 07123_DE-EN-FR-ES-IT_A5_V1.indb 33
EN
18.06.2018 12:28:07 18.06.2018 12:28:07