Publicité
Les langues disponibles
Les langues disponibles
Manuel de l'utilisateur de l'ASI KEOR XPE
Alarm
AS6
Description
At least one Power Unit has enabled alarm A6 BATTERY IN TEST.
➢ Refer to alarm A6 BATTERY IN TEST of the Power Unit.
Possible
causes
Solutions
1. Refer to alarm A6 BATTERY IN TEST of the Power Unit.
Alarm
AS7
Description
At least one Power Unit has enabled alarm A7 BCB OPEN.
➢ Refer to alarm A7 BCB OPEN of the Power Unit.
Possible
causes
Solutions
1. Refer to alarm A7 BCB OPEN of the Power Unit.
Alarm
AS8
Description
At least one Power Unit has enabled alarm A8 BATTERY DISCHARGE.
➢ Refer to alarm A8 BATTERY DISCHARGE of the Power Unit.
Possible
causes
Solutions
1. Refer to alarm A8 BATTERY DISCHARGE of the Power Unit.
Alarm
AS9
Description
At least one Power Unit has enabled alarm A9 BATTERY AUT END.
➢ Refer to alarm A9 BATTERY AUT END of the Power Unit.
Possible
causes
Solutions
1. Refer to alarm A9 BATTERY AUT END of the Power Unit.
Alarm
AS10
Description
At least one Power Unit has enabled alarm A10 BATTERY FAULT or an
alarm occurred on the BMS (if lithium battery with BMS is present).
➢ Refer to alarm A10 BATTERY FAULT of the Power Unit.
Possible
causes
➢ BMS alarm (lithium battery with BMS).
Solutions
1. Refer to alarm A10 BATTERY FAULT of the Power Unit.
2. Check the BMS status and if the alarm persists, contact the
KEOR XPE UPS user manual
Utilizzo dell'UPS KEOR XPE
BATTERY IN TEST
BCB OPEN
BATTERY DISCHARGE
BATTERY AUT END
BATTERY FAULT
Technical Support service (lithium battery with BMS).
OMAF9213 REV. A
69
Publicité
Chapitres
