Installation And Environmental Conditions - Arneg Astana LX Manuel D'installation Et De Service

Astana LX - Mini Astana LX
English
14. Installati on and environmental conditi ons
DANGER! Live parts. Electrocuti on.
The regulati ons and laws in force must be complied with during installati on and use.
DANGER!: caving in/breaking
DO NOT walk on cabinet's roof (Fig.27).
WARNING!
Before carrying out any operati on, take all possible precauti ons to prevent injury to the
operator, use the Personal Protecti on Equipment provided (chapter 3).
WARNING!
Opening the doors. Cabinet overturning. Injuries.
DO NOT open all the doors at the same ti me (Fig.18)
DO NOT use the doors to climb onto the cabinetDO NOT lean against the doors
DO NOT use the doors to drag the cabinet
ATTENTION! Discarded packing parts. Injury.
Do not leave packing parts (nails, wood, staples, etc.) and tools used for the operati on (pli-
ers, scissors, etc.) in the working area.
These objects must be removed with appropriate means and taken to their respecti ve col-
lecti on places.
Installati on is reserved to technicians trained and authorised by the body specifi ed in the
contract (manufacturer/dealer/distributor)
i
- It is the responsibility of the customer to prepare the installati on area
- Changes to the set-up described here must be authorized by ARNEG S.p.A.
The counter can be delivered packed as follows:
• standard: wooden frame secured to the base and nylon cover held by straps (Fig.7)
• opti onal: cardboard box (Fig.8); wooden crate (Fig.9)
The installati on
• comply with the local standards in force
• comply with the environmental climati c class chap.8
area should
• have a fl oor able to support the weight of the counter
• be equipped with a switch with automati c protecti on against short circuits,
• provide the space required for correct venti lati on (Fig.16), use and mainte-
Conditi ons For the cabinet to work properly, the room temperature and relati ve humidity
must not exceed the limits of a climate class 3 (+25°C; R.H. 60%) according to
environmental
standard EN ISO 23953.
counter delivery • ensure the packing is intact and that it does not display readily apparent damage
• carefully perform the unpacking operati on in order not to damage the counter
• check that counter components are intact
• should you noti ce any damage, inform the manufacturer immediately.
52
earth discharge and leakage circuit between the electric power line and the
cabinet
nance
MINI ASTANA LX with built-in condensing unit:
Keep a distance of at least 500 mm from the ceiling to allow correct air
circulati on Fig.14.
05060194 01 05-2022