Clean Specific Materials; Clean The Stainless Steel - Arneg Astana LX Manuel D'installation Et De Service

6 carefully dry using a soft cloth.
i
Should you notice ice built up, call a specialized technician.

23. 5 Clean specific materials

Material
Glass • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of
water and detergent with a dry
cloth in order to prevent marks
from forming and to prevent liquid
from reaching the gaskets, frame,
or the glass door hinges.
• use a cloth soaked in neutral deter-
Plastic
gent
(door seal
• clean with a cloth soaked in clean
profiles)
water
Aluminium • use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming
Wood
• before cleaning the entire surface,
test on a small hidden area and ver-
ify that the cleaner will not damage
the finish or colour
• use a soft cloth with a neutral de-
tergent or soap and lukewarm wa-
ter (max 30°C)
• immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming

23. 6 Clean the stainless steel

Certain situations can cause the formation of rust on the surfaces in steel, such as:
iron remains left on damp surfaces, limestone, chlorine or ammonia based detergents not rinsed
properly, food incrustations or residues, salt-saline solutions, dry residues of evaporated liquids.
recent stains and rust:
Remedy
clean with shampoo or neutral detergents, using a sponge or a rag.
When finished, eliminate any detergent residue, rinsing abundantly and thoroughly
drying the surfaces.
old stains and rust:
use chemical substances on the stainless steel that contain 25% of nitric acid or similar
substances.
persistent stains and rust:
sand with a stainless steel brush, wash with detergent and dry thoroughly.
05060194 01 05-2022
Remedy
This intervention may however cause scratches to the surfaces due to the
abrasive cleaning method. DO NOT use hydrochloric acid on stainless steel
surfaces
Astana LX - Mini Astana LX
What to avoid
• DO NOT use hot water on cold glass surfaces;
the glass could crack and injure the operator
• DO NOT use rough or abrasive materials or
metal scrapers that could scratch the glass
surfaces
• DO NOT use dirty cloths
• DO NOT use waxes, concentrated deter-
gents, which contain oil, bleach, glass clean-
ers, abrasive detergents or flammable fluids.
• DO NOT use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
• DO NOT use rough or abrasive materials or
metal scrapers that scratch the aluminium
surfaces
• DO NOT use steam cleaning equipment
• DO NOT use dirty cloths
• DO NOT use spray cans, acid or alkaline de-
tergents (e.g. bleach), soda or solvents which
could corrode the surfaces
• DO NOT use rough or abrasive materials that
could scratch the surfaces
• DO NOT use steam cleaning equipment
• DO NOT use rough cloths
• moderate the use of liquid detergent: over-
use causes seepage and then swelling of the
wood
English
59