Start Up; Mains Voltage - Broncolor Scoro Serie Mode D'emploi

We thank you very much that you have chosen a "Scoro" power pack which is a high-quality pro-
duct in every respect. If used properly, it will render you many years of good service.
Please read all the information contained in these operating instructions carefully and keep the
manual in a safe place for all users to retrieve the best from the power packs.

1. START UP

1.1 Mains voltage

As a standard feature, all the Scoro power packs are supplied as multi-voltage units.
The Scoro power packs automatically adapt to the respective mains voltage.
Scoro power packs deliver for all operating voltages (85 – 240 V) constant 1600 J or 3200 J.
Attention: Ensure that the operating voltage of the modelling lamp corresponds to the local
mains supply (max. 650 W on 200 – 240 V or 300 W on 100 – 120 V).
Please note: Since November 2019 broncolor is supplying 300 W modelling lamps only.
1.2 Earthed mains (AC-line)
Always connect unit to current supply always using an earthed mains plug.
1.3 Start up
Use the mains (AC-line) switch (1) to power up the unit. During the charging process, the digital
master power display (12) flashes, after which, it becomes continuous (see section 8, "Displays
visual / audible").
9