Special Functions - Broncolor Scoro Serie Mode D'emploi

8.5 Audible messages
Clicking tone:
Key sound (setting of volume is explained in section 13.18).
>
"Beep" tone:
> End of charging or discharging (setting of volume is explained in section 13.17).
"Double-beep" tone:
> Energy limit top or bottom when controlling energy via RFS / RFS 2 transmitter.
"reset" key pressed for 2 s (resetting of additional functions).
>
"reset" key pressed for 10 s (reset to factory settings).
>
"Two-sound" tone:
Technical fault. Ready signal (16) lights red.
>
> Flash monitoring. The display of the lamp which has not fired lights up.
Beginning and end of a thermal blocking procedure. Display in LCD.
>
A suggestion appears on the LCD when setting changes are not possible with the previous
>
specifications.

9. SPECIAL FUNCTIONS

9.1 "speed" key*
Flash duration t 0.1 and charge time are reduced by pressing the
"speed" key (17). Therefore, Scoro power packs are optimised for the
shooting of moving objects and / or fast image sequences. As soon as
the "speed" key is activated, the corresponding LED lights blue and
the maximum flash energy is reduced from 1600 J to 1200 J, and the
energy is reduced from 3200 J to 2400 J. In speed operation, the colour
temperature is fractionally colder, however, consistent over the en-
ergy adjustment range.
The display of the maximum output (12) can be adjusted with the function "max. display"
(see section 13.21).
9.2 "user" key*
When the "user" key (18) is "on" it activates the initial settings of a further operator. With this,
Scoro S power packs can be individually configured for two users in which all the relevant func-
tions and settings are separately stored, thus providing independent preference capabilities for
multiple users.
Those functions, which are stored in standard or user mode, are shown in the two columns "Mem"
(memory) and "Standard / User" in chapter 13.
* Scoro S only 19