Broncolor Scoro Serie Mode D'emploi page 24

13. SCORO S
ADDITIONAL FUNCTIONS & LISTING IN LCD MAIN MENU
Section Function
13.11 Charge time
13.12 Dimmer
13.13 Flash control
13.14 Cell sensitivity
13.15 Studio setup
13.16 Brightness test
13.17 Audio ready signal
13.18 Volume key sound
13.19 Brightness display
24
Description of function
Choice of charging time slow / fast.
"Slow" for longer charging times as option for weak power grids
and motor generators.
The modelling light is reduced (dimmed) during charging. This
option provides protection in case of overloaded power grids or
as a visual flash control.
Selection of flash release: Radio and / or infrared.
Selection of photocell sensitivity.
To determine studio address or RFS 2 channel.
The same channel must be set at the RFS 2 transmitter
To determine lamp address (1 / 2 / 3). The same lamp address
must be set at the RFS 2 transmitter
Studio display: Studio and lamp addresses can be displayed on
the main page of the LCD display.
Brightness of the test key and visual ready display can be altered.
An acoustic ready signal sounds when the power capacitors are
100 % charged. The volume of the signal can be defined.
With "standard" mode, each unit has the same signal. With
"address" mode, the acoustic signal adapts itself to the unit
number.
Setting of volume of acoustic tone when pressing the keys.
4 different settings are available.
The brightness intensity of all backlighting LEDs and LCD
displays can be varied. 3 pre-defined settings are available and a
variable function for automatic adjustment to the ambient light.