Broncolor Scoro Serie Mode D'emploi page 26

13. SCORO S
ADDITIONAL FUNCTIONS & LISTING IN LCD MAIN MENU
Section Function
13.20 Memory 1 – 4
13.21 Max. display
13.22 Flash sequence
13.23 Daily counter
13.24 Flash counter
13.25 Serial number
13.26 Program version
13.27 Country
13.28 Delivery date
13.29 Language
26
Description of function
Stores and recalls the set unit functions.
The marked positions are stored in the "Mem" column.
Standardization of f-stop display of Scoro S whilst operating with
power packs of different output levels. As max. power Scoro S
indicate number 9.
Further in "speed mode", the power reduction can be calculated
with the power display, this means 9.6 for 2400 J for Scoro
3200 S, or 8.6 for Scoro 1600 S, respectively.
Fixed strobo-setting with the fastest possible flash sequence.
This concerns all connected lamps.
Counts the number of flashes triggered since last reset of daily
counter. A brief pressure on the "reset" key sets the counter
back to 0.
Counts the number of flashes triggered over the entire lifespan
of the unit. It cannot be reset.
Individual serial number of the unit. Keep available in case of
servicing / repair.
Current program version. Can be updated by our service
department.
Static country code for specific service data.
Distributors delivery date.
To simplify operation, you can choose between various languages.
In numeric English the figures of the functions correspond to
the LCD menu of the sub-sections of section 11.
For example: "23 flash sequence" corresponds to the LCD menu
from section 13.22 of the operating instructions.