Broncontrol App And Wifi Settings; Operating Modes - Broncolor Scoro Serie Mode D'emploi

7.

BRONCONTROL APP AND WIFI SETTINGS

In order to control your Scoro power pack you can download the app "bronControl" free of charge.
You can find the app under the search term "bronControl" in the particular app store of Google,
Apple and Microsoft. The app is available for smartphones, tablets and computers.
7.1

Operating modes

7.1.1 Operation in "private" mode (factory setting)
If the WiFi mode is activated on more than one Scoro WiFi / RFS 2, these units all link up automati-
cally to form a private network. A smartphone, tablet or a computer must then be connected to
this network in order to control it. To use this, activate the WiFi function on your device. It will then
automatically search for available WiFi networks. Connect your device to the Bron-Studio network.
Factory setting:
- SSID: Bron-Studio XY
- Password: bronControl
Now start the bronControl app on your device and choose the appropriate Bron-Studio network.
For further instructions about operation, please use the help function "?" in the app.
7.1.2 Operation in "enterprise" mode
If there is an existing WiFi network (router), the unit can be integrated into this network using a
smartphone, tablet or computer. To achieve this, in the "bronControl" app, under settings, go to
"Network Settings" and enter your router's settings in "enterprise" mode. Make sure the units are
set to the correct studio address. Scoro saves the last type of connection and tries to connect to
the last network the next time it starts.
7.2 Menu settings
on/off/reset
on
WiFi module is activated. The unit tries to connect to a network.
off
WiFi module is deactivated.
reset
WiFi mode is reset on factory setting.
7.3 WiFi display on unit
Blinking
Permanently on WiFi is activated and connected to a network
WiFi is activated, but not connected to a network
17