Making Coffee With Coffee Powder - Beem 02049 Mode D'emploi

EN
11. Press the button
erating status indicator
transported through the grinder shaft (14) into the fi lter compartment and then hot water
is poured over it to brew it.
If the brewing process is to be aborted prematurely, press the
status indicator
out on the display.
At the end of the brewing process, the device switches off automatically. The operating status
indicator goes out.
If the keep-hot function has been switched on beforehand, the device remains in opera-
tion for up to 40 minutes and the operating status indicator
fl ashes on the display as long as the keep-hot function is switched on. More information
can be found in the "Handling and Operation" chapter – "Keep-Hot Function".

Making Coffee with Coffee Powder

1. Activate the display (19) (see the "Handling and Operation" chapter – "Display Lighting").
2. Fill the water tank (13) (see the "Handling and Operation" chapter – "Filling the Water
Tank").
3. Open the fi lter compartment (5) by pressing the release button for the fi lter compartment
(4).
4. Insert the permanent fi lter (17) or a basket fi lter paper (see the "Handling and Operation"
chapter – "Inserting the Filter").
5. Add the quantity of coffee powder you want to the fi lter using the measuring spoon (10)
which is supplied with the device or another suitable spoon. We recommend one heaped
spoon for each 125 ml cup.
6. Close the fi lter compartment.
7. Set the desired number of cups with the button
tion" chapter – "Setting the Number of Cups").
8. Set the desired coffee strength with the button
eration" chapter – "Setting the Coffee Strength").
9. Activate the aroma button and / or switch on the keep-hot function as you wish (see the
"Handling and Operation" chapter – "Aroma Button" and – "Keep-Hot Function").
10. Press the button
lights up and
powder to brew it.
If the brewing process is to be aborted prematurely, press the
ating status indicator
display.
02049_DE-EN-FR-ES-IT_A5_V4.indb 32 02049_DE-EN-FR-ES-IT_A5_V4.indb 32
(18) to switch on the grinder and start the brewing process. The op- g
lights up and appears on the display.
goes out and the device is switched off.
g
goes out on the display.
(20) to start the brewing process. The operating status indicator
appears on the display.
goes out, the device is switched off and
Freshly ground coffee is
button. The operating
goes
continues to be lit.
(25) (see the "Handling and Opera-
(26) (see the "Handling and Op-
Hot water is poured over the coffee
button. The oper-
32
goes out on the
24.09.2018 15:51:08 24.09.2018 15:51:08